Error code
Bosch F32
BOSCHF32
Error Code· Shown on the appliance's control panel.
What it means
Lower oven temperature sensor failure; an open or short circuit in the lower oven sensor wiring.
How to fix it
- Check all connections, especially P24 on the power board.
- Unplug the senor connector and check sensor resistance (approximately 1080 ohms at room temperature with connector remove). Remember to reconnect it.
- Check that neither sensor wire is open or pinched to the appliance chassis.
- Check that the solder joint in header P24 on the power board are not broken.
- If sensor is OK, replace power board.
Not affiliated with Bosch. Answer summarized from the manufacturer's manual linked above; consult that source for the authoritative procedure.
More Bosch codes
- F41Upper (or single) oven motorized latch will not lock; defective or jammed upper (or single) oven door or latch switches; defective latch motor or its wiring.
- F42Lower motorized latch will not lock; defective or jammed lower oven door or latch switches; defective latch motor or its wiring.
- F43Upper (or single) oven motorized latch will not lock; defective or jammed upper (or single) oven door or latch switches; defective latch motor or its wiring.
- F44Lower motorized latch will not lock; defective or jammed lower oven door or latch switches; defective latch motor or its wiring.
- F45Upper (or single) oven motorized latch will not lock; defective or jammed upper (or single) oven door or latch switches; defective latch motor or its wiring.