Error code

OBD2 P0057

OBD2P0057
Diagnostic Trouble Code· Standard OBD-II fault code read from the vehicle's onboard diagnostics.

What it means

HO2S Heater Control Circuit Low.

Severity

moderateCan drive, but performance issues may occur.

Summary

P0057 indicates a low voltage issue in the heater control circuit of the heated oxygen sensor (HO2S) on bank 2, sensor 2.

Symptoms

  • Rich-running condition
  • Lean-running condition
  • Increased fuel consumption
  • Loss of power
  • Rough idling
  • Visible black smoke from tail pipe
  • Hard starting in some cases
  • Illuminated CHECK ENGINE light

Common Causes

  • Burnt wiring caused by proximity to hot exhaust components
  • Short circuits due to burnt wiring
  • Corrosion or impact damage on electrical connectors
  • Bad ground connections
  • Low battery voltage
  • Blown fuses in the heater control circuit

Diagnosis

  1. Record all fault codes and freeze frame data.
  2. Perform a visual inspection of wiring and connectors for damage or corrosion.
  3. Check battery voltage and perform continuity tests on the heater control circuit.
  4. Inspect sensor resistance and condition; replace if necessary.
  5. Verify proper operation after repairs.

Fixes

  • Replace damaged wiring, connectors, or faulty oxygen sensors as needed.

FAQ

What does P0057 mean?

P0057 indicates a low voltage issue in the heater control circuit of the heated oxygen sensor (HO2S) on bank 2, sensor 2.

How do I diagnose P0057?

Diagnose by checking wiring and connectors for damage, testing battery voltage, performing continuity tests, inspecting sensor resistance and condition, and verifying proper operation after repairs.

View source

Not affiliated with OBD2. Answer summarized from the manufacturer's manual linked above; consult that source for the authoritative procedure.

More OBD2 codes

All OBD2 codes →Search more codes →