Error code
OBD2 P0075
OBD2P0075
Diagnostic Trouble Code· Standard OBD-II fault code read from the vehicle's onboard diagnostics.
What it means
Intake Valve Control Solenoid Circuit.
Severity
moderateCan drive, but performance issues may occur.
Summary
P0075 indicates an issue with the intake valve control solenoid circuit on bank 1 of your engine.
Symptoms
- Check Engine Light (CEL) illuminated
- Rough idle
- Poor performance
- Reduced fuel economy
Common Causes
- Wiring and connector damage
- Open circuit in the solenoid coil
Diagnosis
- Check connector and harness for damage or corrosion.
- Test voltage at the solenoid valve while engine is running.
- Inspect resistance across solenoid valve pins.
Fixes
- Repair damaged wiring or replace faulty connectors.
- Replace the VVT solenoid valve if it has an open circuit or incorrect resistance.
FAQ
What does P0075 mean?
P0075 indicates a malfunction in the intake valve control solenoid circuit on bank 1 of your engine.
How do I diagnose P0075?
Use a multimeter to check voltage and resistance at the VVT solenoid valve, inspect wiring for damage, and ensure connectors are properly seated.
Not affiliated with OBD2. Answer summarized from the manufacturer's manual linked above; consult that source for the authoritative procedure.
More OBD2 codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0005Fuel Shutoff Valve 'A' Control Circuit/Open
- P0006Fuel Shutoff Valve 'A' Control Circuit Low
- P0007Fuel Shutoff Valve 'A' Control Circuit High
- P0008Engine Position System Performance
- P0009Engine Position System Performance
- P0010'A' Camshaft Position Actuator Circuit
- P0011'A' Camshaft Position - Timing Over-Advanced or System Performance
- P0012'A' Camshaft Position - Timing Over-Retarded