Error code
OBD2 P0076
OBD2P0076
Diagnostic Trouble Code· Standard OBD-II fault code read from the vehicle's onboard diagnostics.
What it means
Intake Valve Control Solenoid Circuit Low.
Severity
moderateCan drive, but performance issues may occur.
Summary
P0076 indicates an issue with the intake valve control solenoid circuit being low on voltage in bank 1 of the engine.
Symptoms
- Check Engine Light (CEL) illuminated
- Rough idle
- Poor performance
- Poor fuel economy
Common Causes
- Wiring harness and connector damage
- Open circuit in the solenoid coil
Diagnosis
- Check connector and harness for damage or corrosion.
- Measure voltage at the VVT solenoid valve to ensure it matches battery voltage.
- Inspect wire harness between ECM and VVT solenoid for breaks or shorts.
- Test resistance across the solenoid valve pins.
Fixes
- Repair damaged wiring harness or connector, replace faulty VVT solenoid valve if necessary.
FAQ
What does P0076 mean?
P0076 indicates a low voltage issue with the intake valve control solenoid circuit in bank 1 of the engine.
How do I diagnose P0076?
Use a multimeter to check for proper voltage and resistance at the VVT solenoid valve, inspect wiring harness for damage or shorts.
Not affiliated with OBD2. Answer summarized from the manufacturer's manual linked above; consult that source for the authoritative procedure.
More OBD2 codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0005Fuel Shutoff Valve 'A' Control Circuit/Open
- P0006Fuel Shutoff Valve 'A' Control Circuit Low
- P0007Fuel Shutoff Valve 'A' Control Circuit High
- P0008Engine Position System Performance
- P0009Engine Position System Performance
- P0010'A' Camshaft Position Actuator Circuit
- P0011'A' Camshaft Position - Timing Over-Advanced or System Performance
- P0012'A' Camshaft Position - Timing Over-Retarded