Error code

OBD2 P0193

OBD2P0193
Diagnostic Trouble Code· Standard OBD-II fault code read from the vehicle's onboard diagnostics.

What it means

Fuel Rail Pressure Sensor Circuit High.

Severity

moderateDrive cautiously with reduced power; do not ignore the issue.

Summary

P0193 indicates that the fuel rail pressure sensor is providing an abnormally high voltage signal to the ECM, which could be due to wiring issues or sensor failure.

Symptoms

  • Engine may not start or run poorly
  • Decreased power and fuel economy

Common Causes

  • Fuel rail pressure sensor (FRP) circuit shorted to positive voltage
  • Faulty FRP sensor due to heat and vibration damage

Diagnosis

  1. Check wire harnesses for physical damage
  2. Inspect connectors for bent pins or corrosion
  3. Test continuity and resistance of sensor circuit lines
  4. Measure voltage at the sensor against specifications

Fixes

  • Replace faulty fuel rail pressure sensor

FAQ

What should I do if my car has P0193?

Address the issue promptly by checking for wiring damage and testing the sensor. If problems are found, replace the faulty component.

Can I drive with a P0193 code?

You can drive cautiously but expect reduced power and fuel efficiency. It's best to address the issue soon.

View source

Not affiliated with OBD2. Answer summarized from the manufacturer's manual linked above; consult that source for the authoritative procedure.

More OBD2 codes

All OBD2 codes →Search more codes →