Error code
OBD2 P0244
OBD2P0244
Diagnostic Trouble Code· Standard OBD-II fault code read from the vehicle's onboard diagnostics.
What it means
Turbo/Super Charger Wastegate Solenoid 'A' Range/Performance.
Severity
moderateCan drive, but performance issues may occur.
Summary
P0244 indicates an issue with the turbocharger or supercharger wastegate solenoid 'A', specifically related to its range and performance.
Symptoms
- Engine may experience surging or rough idle
- Decreased engine power
Common Causes
- Damaged, burnt, shorted, disconnected, or corroded wiring and/or connectors in the boost control solenoid’s control/signal circuit(s)
- Defective boost control solenoid
- Defective waste gate actuator
- Failed turbocharger wastegate
Diagnosis
- Inspect and test the wiring and connectors of the boost control solenoid.
- Check for vacuum leaks or damage in the system.
- Test the wastegate actuator and turbocharger wastegate function.
Fixes
- Replace the defective boost control solenoid
FAQ
What does P0244 mean?
P0244 indicates a problem with the turbocharger or supercharger wastegate solenoid 'A', affecting its range and performance.
Where is the wastegate solenoid located?
The wastegate solenoid is typically near the turbocharger, often on the intake manifold or waste gate’s vacuum actuator.
Not affiliated with OBD2. Answer summarized from the manufacturer's manual linked above; consult that source for the authoritative procedure.
More OBD2 codes
- P0200Injector Circuit/Open
- P0201Injector Circuit/Open - Cylinder 1
- P0202Injector Circuit/Open - Cylinder 2
- P0203Injector Circuit/Open - Cylinder 3
- P0204Injector Circuit/Open - Cylinder 4
- P0205Injector Circuit/Open - Cylinder 5
- P0206Injector Circuit/Open - Cylinder 6
- P0207Injector Circuit/Open - Cylinder 7
- P0208Injector Circuit/Open - Cylinder 8
- P0209Injector Circuit/Open - Cylinder 9
- P0210Injector Circuit/Open - Cylinder 10
- P0211Injector Circuit/Open - Cylinder 11