Error code

OBD2 P0341

OBD2P0341
Diagnostic Trouble Code· Standard OBD-II fault code read from the vehicle's onboard diagnostics.

What it means

Camshaft Position Sensor 'A' Circuit Range/Performance.

Severity

moderateThe vehicle may still be drivable but with poor performance and potential misfires.

Summary

P0341 indicates a range or performance issue with the camshaft position sensor 'A' circuit on bank 1 of your engine.

Symptoms

  • No-start or start-stall condition
  • Hard starting, rough running, misfiring, poor acceleration

Common Causes

  • Faulty camshaft position sensor coil
  • Poor installation with incorrect clearance between the sensor and reluctor ring
  • Electrical interference from alternator phase problems in Ford vehicles
  • Rodent damage to wiring or connectors
  • Corrosion, open circuits, or short circuits due to aging materials

Diagnosis

  1. Visual inspection of the sensor connection and wiring harness for damage
  2. Resistance check to identify open or short circuits in the sensor
  3. Signal check using a DVOM in AC V mode during cranking
  4. Electrical inspection including resistance, continuity, and ground checks

Fixes

  • Replace faulty camshaft position sensor if necessary

FAQ

Can I drive with P0341?

You can potentially drive the vehicle, but it may experience poor performance and misfires.

What causes P0341?

Common causes include a faulty sensor coil, incorrect installation clearance, electrical interference in Ford vehicles, rodent damage to wiring or connectors, and aging materials leading to corrosion.

View source

Not affiliated with OBD2. Answer summarized from the manufacturer's manual linked above; consult that source for the authoritative procedure.

More OBD2 codes

All OBD2 codes →Search more codes →