Error code

OBD2 P0450

OBD2P0450
Diagnostic Trouble Code· Standard OBD-II fault code read from the vehicle's onboard diagnostics.

What it means

Evaporative Emission System Pressure Sensor/Switch.

Severity

moderateCan drive, but may have an emissions issue.

Summary

P0450 indicates a malfunction in the evaporative emission system pressure sensor circuit, which monitors fuel vapor leaks in the EVAP system.

Common Causes

  • Faulty EVAP control system pressure sensor
  • Open or short circuits in the EVAP pressure sensor signal wire
  • Bad ground at the EVAP pressure sensor connector
  • Water or corrosion in the EVAP pressure sensor connector
  • Unusually high pressure in the fuel tank due to a blocked EVAP hose

Diagnosis

  1. Perform a visual inspection of wiring and the EVAP control system pressure sensor.
  2. Test the output voltage on the sensor using a multimeter or scan tool.
  3. Wiggle test the wiring to check for communication problems from the sensor to the ECM.
  4. Disconnect the EVAP pressure sensor and monitor voltage changes.

Fixes

  • Replace the faulty EVAP control system pressure sensor if necessary.

FAQ

What does P0450 mean?

P0450 indicates a malfunction in the evaporative emission system pressure sensor circuit.

How do I diagnose P0450?

Diagnose by inspecting wiring, testing voltage output, and performing wiggle tests to identify communication issues or faulty components.

View source

Not affiliated with OBD2. Answer summarized from the manufacturer's manual linked above; consult that source for the authoritative procedure.

More OBD2 codes

All OBD2 codes →Search more codes →