Error code

OBD2 P0614

OBD2P0614
Diagnostic Trouble Code· Standard OBD-II fault code read from the vehicle's onboard diagnostics.

What it means

ECM / TCM Incompatible.

Severity

severeCan drive but may experience erratic behavior. Immediate professional diagnosis is recommended.

Summary

P0614 indicates a communication issue between the Engine Control Module (ECM) and Transmission Control Module (TCM). This can occur due to hardware failures or wiring issues in the CAN bus system.

Symptoms

  • Illuminated warning light
  • Harsh, erratic gear shifts
  • Engine stalling unexpectedly
  • Rough idling or fluctuating idle speed
  • Stumbling or hesitation upon acceleration
  • General loss of engine power
  • Increased fuel consumption

Common Causes

  • Failed or failing ECM/TCM
  • Damaged, burnt, shorted, disconnected, or corroded wiring and connectors in the CAN bus system
  • Failure to reconnect ground straps after maintenance or repairs

Diagnosis

  1. Record all fault codes and freeze frame data.
  2. Inspect connectors for damage, corrosion, or looseness without disconnecting them.
  3. Check ground connections for signs of corrosion or looseness and clean/reconnect as needed.
  4. Perform a thorough visual inspection of wiring leading to the ECM/TCM.

Fixes

  • Replace faulty control modules (ECM, TCM) if necessary
  • Repair or replace damaged wiring and connectors in the CAN bus system.

FAQ

Can I drive with P0614?

You can drive but may experience erratic behavior. Immediate professional diagnosis is recommended.

What causes P0614?

Common causes include failed control modules, damaged wiring in the CAN bus system, and improper reconnection of ground straps after maintenance.

View source

Not affiliated with OBD2. Answer summarized from the manufacturer's manual linked above; consult that source for the authoritative procedure.

More OBD2 codes

All OBD2 codes →Search more codes →