Error code

OBD2 P0741

OBD2P0741
Diagnostic Trouble Code· Standard OBD-II fault code read from the vehicle's onboard diagnostics.

What it means

Torque Converter Clutch Circuit Performance or Stuck Off.

Severity

moderateCan drive, but may experience drivability issues and reduced fuel efficiency.

Summary

P0741 indicates a problem with the torque converter clutch (TCC) circuit performance or that it's stuck in the 'off' position. This issue affects automatic transmissions and can lead to drivability problems.

Symptoms

  • Excessive transmission slippage under hard acceleration
  • Transmission overheating
  • Harsh shifting
  • Increased fuel consumption

Common Causes

  • Degraded or dirty transmission fluid
  • Wiring issues such as short circuits, open circuits, or disconnected wires
  • Use of unsuitable transmission fluid
  • Low fluid level
  • Insufficient hydraulic pressure
  • Defective torque converter clutch solenoid
  • Blockages in small fluid passages by sludge or wear particles

Diagnosis

  1. Check the transmission fluid level and condition.
  2. Record all codes present and freeze frame data.
  3. Inspect wiring for damage or corrosion.
  4. Perform ground, resistance, continuity, and input voltage checks on the harness.
  5. Compare readings with manufacturer specifications.
  6. Replace defective components as needed.

Fixes

  • Replace damaged wiring or connectors in the TCC circuit.
  • Replace the torque converter clutch solenoid if it is faulty.

FAQ

Can I drive with P0741?

You can drive, but you may experience drivability issues and reduced fuel efficiency.

What causes P0741?

Common causes include degraded transmission fluid, wiring issues, or a faulty torque converter clutch solenoid.

View source

Not affiliated with OBD2. Answer summarized from the manufacturer's manual linked above; consult that source for the authoritative procedure.

More OBD2 codes

All OBD2 codes →Search more codes →