Error code

OBD2 P0776

OBD2P0776
Diagnostic Trouble Code· Standard OBD-II fault code read from the vehicle's onboard diagnostics.

What it means

Pressure Control Solenoid 'B' Performance or Stuck off.

Severity

highCan drive but may experience shifting issues and potential damage to the transmission.

Summary

P0776 indicates a problem with the pressure control solenoid B in the transmission. This can cause issues with gear shifting and fluid pressure regulation.

Symptoms

  • Illuminated warning light
  • Harsh, erratic, or unpredictable gear shifts
  • Transmission may slip or hesitate before selecting gears
  • Engine stalling when slowing down
  • Vehicle entering failsafe mode

Common Causes

  • Damaged wiring and connectors
  • Defective pressure control solenoid B
  • Mechanical failure of internal transmission components
  • Failed pressure pump
  • Dirty or contaminated transmission fluid
  • Low transmission fluid levels
  • Use of incorrect transmission fluid

Diagnosis

  1. Check for additional fault codes
  2. Inspect transmission fluid level and condition
  3. Identify and repair any fluid leaks
  4. Test pressure at correct testing points

Fixes

  • Replace defective solenoid or other faulty components

FAQ

What should I do if my transmission fluid is dirty?

If the transmission fluid is contaminated, it needs to be replaced with fresh fluid of the correct type and grade as per the vehicle manual.

Can I drive with P0776 code?

You can drive but may experience shifting issues. It's recommended to address the issue promptly to prevent further damage.

View source

Not affiliated with OBD2. Answer summarized from the manufacturer's manual linked above; consult that source for the authoritative procedure.

More OBD2 codes

All OBD2 codes →Search more codes →