Error code
OBD2 P0874
OBD2P0874
Diagnostic Trouble Code· Standard OBD-II fault code read from the vehicle's onboard diagnostics.
What it means
Transmission Fluid Pressure Sensor/Switch 'C' Circuit Intermittent.
Severity
severeDo not drive as severe transmission damage could result.
Summary
P0874 indicates an intermittent issue with the transmission fluid pressure sensor or switch 'C' circuit in the automatic transmission system.
Symptoms
- Check engine light
- Transmission not engaging
- Incorrect shifting
- Burnt fluid smell
Common Causes
- Low transmission fluid level
- Dirty or contaminated transmission fluid
- Faulty wiring or connection to the TFP sensor
- Damaged TFP sensor
- Internal transmission pressure pump malfunction
Diagnosis
- Check and top up the transmission fluid level.
- Inspect for leaks in the transmission system.
- Examine wiring connections to the TFP sensor for damage or corrosion.
- Test the voltage, ground, and resistance of the TFP sensor.
- Consult a professional if internal pump issues are suspected.
Fixes
- Replace faulty wiring or repair leaks in the transmission system.
- Replace the damaged TFP sensor.
FAQ
What should I do if my car enters 'limp home' mode with P0874?
Do not drive and seek professional help immediately to avoid severe transmission damage.
Can a faulty PCM cause this code?
A faulty PCM is extremely rare but possible. It should only be considered after ruling out other causes.
Not affiliated with OBD2. Answer summarized from the manufacturer's manual linked above; consult that source for the authoritative procedure.
More OBD2 codes
- P0800Transfer Case Control System (MIL Request)
- P0801Reverse Inhibit Control Circuit
- P0802Transmission Control System MIL Request Circuit/Open
- P08031-4 Upshift (Skip Shift) Solenoid Control Circuit
- P08041-4 Upshift (Skip Shift) Lamp Control Circuit
- P0805Clutch Position Sensor Circuit
- P0806Clutch Position Sensor Circuit Range/Performance
- P0807Clutch Position Sensor Circuit Low
- P0808Clutch Position Sensor Circuit High
- P0809Clutch Position Sensor Circuit Intermittent
- P0810Clutch Position Control Error
- P0811Excessive Clutch Slippage