Error code

OBD2 P0902

OBD2P0902
Diagnostic Trouble Code· Standard OBD-II fault code read from the vehicle's onboard diagnostics.

What it means

Clutch Actuator Circuit Low.

Severity

moderateCan drive but may experience issues with gear changes and engine stalling.

Summary

P0902 indicates a low voltage issue in the clutch actuator circuit, which is part of the transmission control system responsible for automatic gear changes.

Symptoms

  • Engine may stall during driving
  • Vehicle may not crank as a safety precaution
  • Transmission may enter limp mode or get stuck in one gear

Common Causes

  • Short circuits due to damaged wiring or corroded connectors
  • Internal electrical failures in the actuator motor/solenoid
  • Failures of clutch motion/travel sensors
  • Faulty selector switch on the gear selector

Diagnosis

  1. Check for related codes P0900, P0901, and P0903
  2. Inspect wiring, fuses, relays, and connectors for damage or corrosion
  3. Test the selector switch and battery condition
  4. Perform ground, power supply, and continuity checks on all control circuit components
  5. Directly test the actuator mechanism if it does not respond to normal operation

Fixes

  • Repair damaged wiring or replace faulty switches/sensors/actuators as needed

FAQ

What should I do if the code returns after repairs?

There may be an intermittent fault present. Allow it to worsen before making a definitive repair.

Do I need to reprogram the actuator mechanism after replacement?

Consult your vehicle's manual as some applications require reprogramming with the TCM or PCM.

View source

Not affiliated with OBD2. Answer summarized from the manufacturer's manual linked above; consult that source for the authoritative procedure.

More OBD2 codes

All OBD2 codes →Search more codes →