Error code

OBD2 P2563

OBD2P2563
Diagnostic Trouble Code· Standard OBD-II fault code read from the vehicle's onboard diagnostics.

What it means

Turbocharger Boost Control Position Sensor Circuit Range/Performance.

Severity

highCan drive but may experience power loss, increased fuel consumption, and potential engine damage.

Summary

P2563 indicates a problem with the turbocharger boost control position sensor or its electrical circuit, affecting the engine's ability to manage boost pressure effectively.

Symptoms

  • Stored trouble code and possibly an illuminated warning light
  • Power loss varying from slight at certain speeds to severe across all speeds
  • Increased fuel consumption
  • Engine hesitation or stumbling upon acceleration
  • Potential for severe engine damage if turbo boost cannot be controlled

Common Causes

  • Damaged, burnt, shorted, disconnected, or corroded wiring and connectors
  • Defective turbocharger boost control position sensor
  • Restrictions in the inlet or exhaust system
  • Failed or failing PCM (rare)

Diagnosis

  1. Record all fault codes and freeze frame data.
  2. Inspect wiring and connectors for damage or corrosion.
  3. Test actual boost pressure using a dedicated gauge.
  4. Check reference voltage between sensor connector and PCM.
  5. Perform resistance testing on signal wire.
  6. Test the turbocharger boost control position sensor itself.

Fixes

  • Replace damaged wiring, connectors, or defective sensors as needed.

FAQ

Can I drive with P2563?

You can drive but may experience power loss and increased fuel consumption. Severe engine damage is possible if the issue persists.

What causes P2563?

Common causes include damaged wiring, defective sensors, or restrictions in the inlet/exhaust system.

View source

Not affiliated with OBD2. Answer summarized from the manufacturer's manual linked above; consult that source for the authoritative procedure.

More OBD2 codes

All OBD2 codes →Search more codes →