Error code

OBD2 P2762

OBD2P2762
Diagnostic Trouble Code· Standard OBD-II fault code read from the vehicle's onboard diagnostics.

What it means

Torque Converter Clutch Pressure Control Solenoid Control Circuit Range/Performance.

Severity

highDriving may be difficult due to transmission issues. It is recommended to have the vehicle towed for repair.

Summary

Code P2762 indicates an issue with the Torque Converter Clutch (TCC) pressure control solenoid's performance or range in the transmission system.

Symptoms

  • Malfunction Indicator Light is on
  • Transmission won't shift, often stuck in 2nd or 3rd gear
  • Torque converter clutch doesn't engage properly, causing higher engine RPMs at highway speeds

Common Causes

  • Faulty TCC Pressure Control Solenoid (most common)
  • Wiring issues to the TCC solenoid (open or shorted connections)
  • Failed Throttle Position Sensors (less likely)
  • Failed Transmission Control Module (TCM) (least likely)

Diagnosis

  1. Check for technical service bulletins and other diagnostic codes
  2. Inspect wiring connections between TCM and TCC solenoid
  3. Test resistance of the TCC pressure control solenoid
  4. Verify voltage signals to each TCC solenoid and wiring integrity

Fixes

  • Replace faulty TCC Pressure Control Solenoid or repair wiring issues

FAQ

What should I do if my car's transmission is stuck in a gear?

If your car's transmission is stuck in a gear, it could be due to code P2762. It’s best to have the vehicle towed and inspected by a professional mechanic.

View source

Not affiliated with OBD2. Answer summarized from the manufacturer's manual linked above; consult that source for the authoritative procedure.

More OBD2 codes

All OBD2 codes →Search more codes →