Error code
KitchenAid E3
KITCHENAIDE3
Error Code· Shown on the appliance's control panel.
What it means
User Interface or Software Mismatch.
How to fix it
- If this error code appears, there is a user interface or software mismatch. It is also possible that the electronic control board or console electronics has failed. Replace failed component. Note: This error code will ONLY appears in the diagnostic test mode.
Not affiliated with KitchenAid. Answer summarized from the manufacturer's manual linked above; consult that source for the authoritative procedure.
More KitchenAid codes
- E1Open Thermistor
- E2Shorted Thermistor
- E4Tumbler Rotation Failure
- E5Dry Rack Sensor
- E6Exhaust High Limit Fault
- F0Control Board Failure
- F02Long Drain (Drain Exceeds 8 Minutes)
- F03One or More Eyes Permanently Pressed
- F05Water Temperature Sensor Error
- F06Drive Motor Tachometer Error (Unable to Detect Motor Speed)
- F07Motor Control Unit (MCU) Error
- F09Overflow Condition (Pressure Switch Closed Too Long)