Error code
KitchenAid F07
KITCHENAIDF07
Error Code· Shown on the appliance's control panel.
What it means
Motor Control Unit (MCU) Error.
How to fix it
- Unplug unit and disconnect power to check wire harness connections between drive motor and MCU, and between MCU and Central Control Unit (CCU). Reconnect power and plug unit in. Check the MCU by looking for operations of the drive motor, and check drive motor for powered rotations. Note: If this failure occurs during high-speed spin, the door will be unlocked after three minutes.
Not affiliated with KitchenAid. Answer summarized from the manufacturer's manual linked above; consult that source for the authoritative procedure.
More KitchenAid codes
- E1Open Thermistor
- E2Shorted Thermistor
- E3User Interface or Software Mismatch
- E4Tumbler Rotation Failure
- E5Dry Rack Sensor
- E6Exhaust High Limit Fault
- F0Control Board Failure
- F02Long Drain (Drain Exceeds 8 Minutes)
- F03One or More Eyes Permanently Pressed
- F05Water Temperature Sensor Error
- F06Drive Motor Tachometer Error (Unable to Detect Motor Speed)
- F09Overflow Condition (Pressure Switch Closed Too Long)