Error code
OBD2 P0986
OBD2P0986
Diagnostic Trouble Code· Standard OBD-II fault code read from the vehicle's onboard diagnostics.
What it means
Shift Solenoid 'E' Control Circuit High.
Severity
moderateCan drive but may experience shifting issues.
Summary
P0986 indicates that Shift Solenoid E in your transmission has an electrical issue causing high resistance or an open circuit.
Symptoms
- Poor acceleration
- High-revving before shifting
- Harsh shifting
Common Causes
- Rodent damage to wiring harness
- Improperly routed or damaged wiring harness after repairs
- Burnt out shift solenoid E
Diagnosis
- Inspect wiring harness for damage or improper routing
- Check connectors and ensure they are properly connected
- Perform resistance checks between TCM and shift solenoid E
Fixes
- Repair damaged wiring harness or replace faulty shift solenoid
FAQ
Can I drive with P0986?
Yes, but you may experience shifting issues and poor acceleration.
What causes P0986?
Common causes include rodent damage to wiring harnesses or improperly routed/repaired wiring.
Not affiliated with OBD2. Answer summarized from the manufacturer's manual linked above; consult that source for the authoritative procedure.
More OBD2 codes
- P0900Clutch Actuator Circuit/Open
- P0901Clutch Actuator Circuit Range/Performance
- P0902Clutch Actuator Circuit Low
- P0903Clutch Actuator Circuit High
- P0904Gate Select Position Circuit
- P0905Gate Select Position Circuit Range/Performance
- P0906Gate Select Position Circuit Low
- P0907Gate Select Position Circuit High
- P0908Gate Select Position Circuit Intermittent
- P0909Gate Select Control Error
- P0910Gate Select Actuator Circuit/Open
- P0911Gate Select Actuator Circuit Range/Performance