Error code

OBD2 P2013

OBD2P2013
Diagnostic Trouble Code· Standard OBD-II fault code read from the vehicle's onboard diagnostics.

What it means

Intake Manifold Runner Control Circuit High.

Severity

moderateCan drive but may experience reduced performance and increased emissions.

Summary

Code P2013 indicates an abnormally high voltage in the control circuit of the intake manifold runner control (IMRC) actuator/solenoid on bank 2, which can prevent proper communication between the IMRC system and the PCM.

Common Causes

  • Damaged, burnt, shorted, disconnected, or corroded wiring and/or connectors
  • Defective IMRC position switch
  • Defective electrically operated IMRC actuator
  • Failed or failing PCM (rare)

Diagnosis

  1. Inspect wiring and connectors for damage, corrosion, or shorts.
  2. Check IMRC position switch for proper operation.
  3. Test electrically operated IMRC actuator if applicable.
  4. Scan for additional codes that might indicate sensor issues.

Fixes

  • Replace damaged wiring/connectors and repair any electrical faults.
  • Replace defective IMRC position switch or actuator as needed.

FAQ

What does P2013 mean?

P2013 indicates a high voltage issue in the control circuit of the intake manifold runner control system on bank 2.

How serious is code P2013?

Moderately serious; it can affect engine performance and emissions but usually does not prevent driving.

View source

Not affiliated with OBD2. Answer summarized from the manufacturer's manual linked above; consult that source for the authoritative procedure.

More OBD2 codes

All OBD2 codes →Search more codes →