Error code
OBD2 P2114
OBD2P2114
Diagnostic Trouble Code· Standard OBD-II fault code read from the vehicle's onboard diagnostics.
What it means
Throttle/Pedal Position Sensor 'C' Minimum Stop Performance.
Severity
moderateCan drive but may experience issues with acceleration and fuel efficiency.
Summary
P2114 indicates an issue with the Throttle/Pedal Position Sensor 'C', specifically related to its minimum stop performance, which is located in the engine's throttle valve area.
Common Causes
- Throttle valve tight or sticking
- Faulty APP sensor / TP sensor
Fixes
- Replace the faulty Throttle/Pedal Position Sensor 'C'
FAQ
What does P2114 mean?
P2114 indicates a problem with the minimum stop performance of the Throttle/Pedal Position Sensor 'C'.
Not affiliated with OBD2. Answer summarized from the manufacturer's manual linked above; consult that source for the authoritative procedure.
More OBD2 codes
- P2100Throttle Actuator Control Motor Circuit/Open
- P2101Throttle Actuator Control Motor Circuit Range/Performance
- P2102Throttle Actuator Control Motor Circuit Low
- P2103Throttle Actuator Control Motor Circuit High
- P2104Throttle Actuator Control System - Forced Idle
- P2105Throttle Actuator Control System - Forced Engine Shutdown
- P2106Throttle Actuator Control System - Forced Limited Power
- P2107Throttle Actuator Control Module Processor
- P2108Throttle Actuator Control Module Performance
- P2109Throttle/Pedal Position Sensor 'A' Minimum Stop Performance
- P2110Throttle Actuator Control System - Forced Limited RPM
- P2111Throttle Actuator Control System - Stuck Open