Error code
Roper F2
ROPERF2
Error Code· Shown on the appliance's control panel.
What it means
Oven Temperature Is Too High.
How to fix it
- Check for welded contacts on bake and broil relays. If present, replace control board (clock). For SELF CLEAN models, check door lock operation. Check sensor, sensor harness, and the sensor harness connection at sensor and oven control. Also check for any causes of high resistance in the oven temperature sensor circuit. Remember: The oven control board (clock) measures resistance of sensor circuit, not actual oven temperature.
Not affiliated with Roper. Answer summarized from the manufacturer's manual linked above; consult that source for the authoritative procedure.
More Roper codes
- F0Control Board Failure
- F1Control Board Failure
- F1E0EEPROM Communication Error
- F1E1EEPROM Checksum Error
- F1E2UL A/D Error(s)
- F1E3Wiring Harness Cavity Size Does Not Match Stored Value
- F1E4Model ID Error
- F1E5Calibration Shifted
- F1E6Latch Signal Mismatch Error
- F1E9Stack Overflow
- F2E0Shorted Touch Pad (Keypad)
- F2E1Touch Pad (Keypad) Cable Unplugged