Error code
KitchenAid F10
KITCHENAIDF10
Error Code· Shown on the appliance's control panel.
What it means
Motor Control Unit (MCU) Heat Kink Thermal Trip (Too Hot).
How to fix it
- Check for proper installation and ventilation, and make sure unit is not located near a heat source. Disconnect power and unplug the unit to check wire harness connections to the motor, MCU, and Central Control Unit (CCU). Check the drive system for any worn or failed components and reconnect power and plug unit in. Check MCU by looking for operations of the drive motor and check drive motor for powered rotations. Replace failed component.
Not affiliated with KitchenAid. Answer summarized from the manufacturer's manual linked above; consult that source for the authoritative procedure.
More KitchenAid codes
- E1Open Thermistor
- E2Shorted Thermistor
- E3User Interface or Software Mismatch
- E4Tumbler Rotation Failure
- E5Dry Rack Sensor
- E6Exhaust High Limit Fault
- F0Control Board Failure
- F02Long Drain (Drain Exceeds 8 Minutes)
- F03One or More Eyes Permanently Pressed
- F05Water Temperature Sensor Error
- F06Drive Motor Tachometer Error (Unable to Detect Motor Speed)
- F07Motor Control Unit (MCU) Error