Error code
KitchenAid F12
KITCHENAIDF12
Error Code· Shown on the appliance's control panel.
What it means
Electronic Board and Touch Module Communication Error.
How to fix it
- Disconnect power for one minute and check to see if error reappears once power has been restored. If error continues, replace board connection cable between touch control module and electronic control. If error continues, replace electronic control (control board) and if error still persists, replace the touch module (touch pad).
Not affiliated with KitchenAid. Answer summarized from the manufacturer's manual linked above; consult that source for the authoritative procedure.
More KitchenAid codes
- E1Open Thermistor
- E2Shorted Thermistor
- E3User Interface or Software Mismatch
- E4Tumbler Rotation Failure
- E5Dry Rack Sensor
- E6Exhaust High Limit Fault
- F0Control Board Failure
- F02Long Drain (Drain Exceeds 8 Minutes)
- F03One or More Eyes Permanently Pressed
- F05Water Temperature Sensor Error
- F06Drive Motor Tachometer Error (Unable to Detect Motor Speed)
- F07Motor Control Unit (MCU) Error