Error code
KitchenAid F14
KITCHENAIDF14
Error Code· Shown on the appliance's control panel.
What it means
EEPROM Error.
How to fix it
- Disconnect power and unplug unit. Verify Central Control Unit (CCU) is operating properly by running a diagnostic test or any cycle. Replace is defective. Note: A power glitch may cause this error.
Not affiliated with KitchenAid. Answer summarized from the manufacturer's manual linked above; consult that source for the authoritative procedure.
More KitchenAid codes
- E1Open Thermistor
- E2Shorted Thermistor
- E3User Interface or Software Mismatch
- E4Tumbler Rotation Failure
- E5Dry Rack Sensor
- E6Exhaust High Limit Fault
- F0Control Board Failure
- F02Long Drain (Drain Exceeds 8 Minutes)
- F03One or More Eyes Permanently Pressed
- F05Water Temperature Sensor Error
- F06Drive Motor Tachometer Error (Unable to Detect Motor Speed)
- F07Motor Control Unit (MCU) Error