Error code
KitchenAid F7E1
KITCHENAIDF7E1
Error Code· Shown on the appliance's control panel.
What it means
Common Switch Wire Is Defective.
How to fix it
- This error occurs when common wire to latch switch and door switch is shorted. Check all connections at control board and at the latch switch and door switch. If connections are ok, then check individual switches as outlined for the F5 error code. Note: Double ovens will have two of each switch and one common wire.
Not affiliated with KitchenAid. Answer summarized from the manufacturer's manual linked above; consult that source for the authoritative procedure.
More KitchenAid codes
- E1Open Thermistor
- E2Shorted Thermistor
- E3User Interface or Software Mismatch
- E4Tumbler Rotation Failure
- E5Dry Rack Sensor
- E6Exhaust High Limit Fault
- F0Control Board Failure
- F02Long Drain (Drain Exceeds 8 Minutes)
- F03One or More Eyes Permanently Pressed
- F05Water Temperature Sensor Error
- F06Drive Motor Tachometer Error (Unable to Detect Motor Speed)
- F07Motor Control Unit (MCU) Error