Error code
Roper F7E1
ROPERF7E1
Error Code· Shown on the appliance's control panel.
What it means
Common Switch Is Defective.
How to fix it
- This error occurs when common wire to latch switch and door switch is shorted. Check all connections at control board and at the latch switch and door switch. If connections are ok, then check individual switches as outlined for the F5 error code. Note: Double ovens will have two of each switch and one common wire.
Not affiliated with Roper. Answer summarized from the manufacturer's manual linked above; consult that source for the authoritative procedure.
More Roper codes
- F0Control Board Failure
- F1Control Board Failure
- F1E0EEPROM Communication Error
- F1E1EEPROM Checksum Error
- F1E2UL A/D Error(s)
- F1E3Wiring Harness Cavity Size Does Not Match Stored Value
- F1E4Model ID Error
- F1E5Calibration Shifted
- F1E6Latch Signal Mismatch Error
- F1E9Stack Overflow
- F2Oven Temperature Is Too High
- F2E0Shorted Touch Pad (Keypad)